Anti-Corrosion PTFE Fuel Tank Gauge for Float Ball Water Level Meter with High Accuracy

• After-sales Service: Free Forever
• Principle: Magnetic Sensors
• Range: 0-5m
• Measurement Accuracy: ±3mm
• Accuracy: 0.25%
• Kind: Magnetic Flap
• Model NO.: UHZ
• Structure: All in One
• Warranty: 5 Year
• Certification: CE, RoHS
• Material: SS304
• Process Temperature: -80~300℃
• Viscosity: Less Than 5000MPa.S
• Max Pressure: 42.0MPa
• IP Protection: IP65
• Max Temperature: 450c
• Protocol: Hart/RS485
• Resolution: 10mm
• Transport Package: Wooden Case
• Trademark: BEITE
• Origin: China
• HS Code: 902610000
• Production Capacity: 100 PCS Per Month

Product Description

Product Description

Magnetic FLap Float Level meter  is used for measuring liquid levels in open or pressurized tanks. Due to its special design, it is particularly suitable for use in connection with aggressive, noxious or flammable substances and tough service conditions.
No power is required for local liquid-level indication.Optionally, the unit can be equipped or retrofitted with an electrical analogue level transducer system and/or limit switches.
Measuring Principle
The unit operates on the principle of communicating tubes. The measuring tube is connected as a side vessel to the tank such that the same conditions are obtained in the tube as those in the tank.
The float is equipped with a system of permanent magnets to transmit measured values to the local indicator.The magnet system of the float activates the magnetic flaps according to the liquid level,or a movable follower magnet in the indicating section of the indicator.
Performance
△Simple,rugged,advanced technology,fashionable design
△Withstanding pressure, indicating part and measuring part is insulated by sealing
△Suitable for tough operating and enviorment conditions
△Reliable for liquid/gasol,at density ≥ 0.5kg/l
△Big bar scale,easily read
△Various versions,with inner PTFE or hard plastics and so on
△Pressure:standard≥4.0MPa,middle pressure:6.4MPa,high pressure:10.0MPa,16.0MPa Temperature:standard ≤ 150ºC, middle temperature ≤ 200ºC,high temperature ≤ 450ºC Measure interface,at △density difference ≥ 0.1kg/l
△Changeable indicator,optional limit switches and remote transducer system
△remote current output:4~20mA

Detailed Photos

Product Parameters

Measuring range	300-60,000mm
Accuracy	± 5mm FS
Density	0.5~3.0kg/l
Viscosity	≤ 5000mPa.s
Operating Pressure	Standard	≤ 4.0Mpa
	Middle	4.0-10.0Mpa
	Max	10.0-42.0Mpa
Indicator Scales	Standard	mm/cm
	Special	Inch/feet
IP protection	IP65
Operating Temperature	Standard	≤ 150ºC
	Middle	150- 200ºC
	Max	200- 450ºC
Output	4-20mA
Protocol	HART

Application

 

Certifications

Packaging & Shipping

Company Profile

After Sales Service