| Customization: | Available |
|---|---|
| After-sales Service: | Free Forever |
| Principle: | Magnetic Sensors |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Magnetic FLap Float Level meter is used for measuring liquid levels in open or pressurized tanks. Due to its special design, it is particularly suitable for use in connection with aggressive, noxious or flammable substances and tough service conditions.
No power is required for local liquid-level indication.Optionally, the unit can be equipped or retrofitted with an electrical analogue level transducer system and/or limit switches.
Measuring Principle
The unit operates on the principle of communicating tubes. The measuring tube is connected as a side vessel to the tank such that the same conditions are obtained in the tube as those in the tank.
The float is equipped with a system of permanent magnets to transmit measured values to the local indicator.The magnet system of the float activates the magnetic flaps according to the liquid level,or a movable follower magnet in the indicating section of the indicator.
Performance
△Simple,rugged,advanced technology,fashionable design
△Withstanding pressure, indicating part and measuring part is insulated by sealing
△Suitable for tough operating and enviorment conditions
△Reliable for liquid/gasol,at density ≥ 0.5kg/l
△Big bar scale,easily read
△Various versions,with inner PTFE or hard plastics and so on
△Pressure:standard≥4.0MPa,middle pressure:6.4MPa,high pressure:10.0MPa,16.0MPa Temperature:standard ≤ 150ºC, middle temperature ≤ 200ºC,high temperature ≤ 450ºC Measure interface,at △density difference ≥ 0.1kg/l
△Changeable indicator,optional limit switches and remote transducer system
△remote current output:4~20mA
| Measuring range | 300-60,000mm | |
| Accuracy | ± 5mm FS | |
| Density | 0.5~3.0kg/l | |
| Viscosity | ≤ 5000mPa.s | |
| Operating Pressure | Standard | ≤ 4.0Mpa |
| Middle | 4.0-10.0Mpa | |
| Max | 10.0-42.0Mpa | |
| Indicator Scales | Standard | mm/cm |
| Special | Inch/feet | |
| IP protection | IP65 | |
| Operating Temperature | Standard | ≤ 150ºC |
| Middle | 150- 200ºC | |
| Max | 200- 450ºC | |
| Output | 4-20mA | |
| Protocol | HART | |
){kind=link}